All the best promotions in woodworking machines and tools, garden range: log splitters and log saws, machine accessories, everything for DIY at a low price!
Bernardo NTS200 sharpens all your woodworking tools and cutting tools, without heating them because the stone is immersed in a cold water bath!
The FP1 cartridge incorporated into this vacuum cleaner chip improves its extraction of a significant force and ensures an efficient filtration of particles and fine dust.
The Bernardo DC230 Dust collector is the best in class with its 100 liters of storage, metal turbine, 750W motor and suction power of 1080 m³ / h!
The Bernardo DC450CF dust collector equipped with an FP2 filter cartridge offers a suction capacity of 2800 m³ / h and storage of 300 liters of chips!
The dust collector Bernardo DC500E has a capacity of 2 times 200 liters of chip storage, so more than its competitors, because its height is greater! It has a motor of 2200W, a suction power of 3880 m³ / h!
The dust collector Bernardo DC500E has a capacity of 2 times 200 liters of chip storage, so more than its competitors, because its height is greater! It has a motor of 2200W, a suction power of 3880 m³ / h!
The planer Bernardo TH330 is a compact and easy-to-carry unit, making this model ideal for use on construction sites as well. It offers 330 mm of alignment width!
The Leman LODRA210 jointer and planer offers 210 mm for jointing and 194 mm for planing too! Lightweight machine easy to transport and handle!
The planer and thicknesser Bernardo PT260 is a rugged machine with built-in dust collector system - no more dust collector hose in your shop!
The PT 305 D planer and thicknesser offers a wide range of standard accessories, including an integrated dust extractor, waste bag and knife gauge, making this model unbeatable in price-performance ratio for the price conscious user.
The planer thicknesser Bernardo ADM260 is a high-strength cast-iron machine that will meet the requirements of the discerning enthusiast with its 250 mm width!
The Holzmann HOB260ECOSMW2 260 mm jointer and planer with helical shaft - 230V is an ideal machine for DIY enthusiasts.
The Bernardo ADM260S planer jointer with helical shaft naturally meets the requirements for stability, high reserve power and safety.
The Bernardo AD260S planer jointer naturally meets the requirements for stability, high power and safety. The other strong point of this machine is its helical knife planer shaft which reduces noise stress and ensures optimum results.
The mortiser at chisel Jean l'ébéniste MS3840 is better than other models because of its 1100W motor and its rotation speed of 2800rpm.
The CWM 150 combination is a very practical machine which offers many possibilities of use in a minimum of space, for a very low price. This very compact model is easy to transport and can be used anywhere.
The T 500 PF - an enhanced version of the T 500 PR model - features a sliding table to widen the range of applications enormously and make it an attractive option for experienced amateurs.
The Sliding mitre saw Bernardo ZKG305D is ideal for working with wood, plastic profiles, coated plates and non-ferrous metals. With its thoughtful details, like the double tilt and double tab function, the high guide rails and the laser cutting line, it is a versatile and flexible machine for interior design.
The Bernardo ZKG305D radial miter saw is ideal for working with wood, plastic profiles, coated plates and non-ferrous metals. With its thoughtful details, like the double tilt and double tab function, the high guide rails and the laser cutting line, it is a versatile and flexible machine for interior design.
The Holzprofi SRO305 radial arm saw is ideal for high precision cuts and offers a large cutting capacity of 340 x 105 mm with a more powerful 2000W motor!
The HBS 260 bandsaw offers generous cutting power in a minimum of space. Its optimal price-performance ratio makes it the ideal tool for DIY enthusiasts.
The HBS 360 bandsaw offers generous cutting power in a minimum of space. Its optimal price-performance ratio makes it the ideal tool for DIY enthusiasts.
The Holzmann HBS400 band saw offers a cutting height of 220 mm, cast iron rims of 400 mm, 1500W motor ...
The band saw Jean l'ébéniste BS480 offers great cutting capabilities with a powerful 3 HP engine!
The drum sander with cylinder Jean l'ébéniste allows you to sand large surfaces quickly and easily.
The ZSM 560 cylinder sander is suitable for sanding work on workpieces up to 1120 mm wide. Conveyor feed speed varies to match the parts for optimal results.
This power feeder Baby M3 is dedicated to small machines and spindles allowing the realization of work in series.
The Bernardo work benches WB 2000 Hobby made from beech feature precise workmanship and an excellent finish and are therefore the best choice for craftsmen and carpenters.
The bench grinder versatile "two-in-one" Scheppach BGS700 is a machine for sanding and grinding.
The milling machine KF 20 L Super features a brushless DC- motor, allowing smooth operation and a consistent spindle drive over the entire speed range.
The Bench drill Bernardo BM20 Vario offers high torque even at low speed due to its variable speed and a capacity of 20 mm in steel.
The Leman PCR020 drill press offers 20mm of drilling capacity with a 600W motor.
Radial floor drill Leman PRC016 East of robust manufacturing, large diameter column, equipped with quick Chuck.
Holzmann BS125M band saw is versatile and ideal for cutting iron, steel, aluminum, copper and PVC.
Powerful and precise JET HVBS-56M metal band saw ideal for small workshops and construction sites. Its 1/2 HP single-phase motor offers great versatility and power when cutting in the horizontal or vertical position.
The model KF 25 D Vario comes complete with a digital speed and spindle stroke display as a standard feature. The machine is very popular among both professionals and model-markers along with all areas of training.
The Bernardo KF26L Top metal drilling and milling machine is equipped with a DC motor. The advantages are a high torque in the low speed ranges and an almost constant speed under load.
Economic, the Bernardo EBS128CL metal band saw offers an ideal cutting capacity for experienced DIY enthusiasts by combining power and simplicity of handling.
Small manual shears roller Holzmann RBS15 transportable, ideal for straight, accurate cuts.
Swaging Holzmann SKM470S solid and stable, perfectly suited for the manufacture of pipe fittings of different materials (steel, aluminum, brass, bronze, copper and others).
Scheppach HS510 log saw with a blade of 500 mm can cut firewood up to 17 cm!
New Zipper ZI-WP700T log saw equipped with a powerful 4500 W motor, two wheels and a 700 mm blade!
The Holzmann BBS350 log saw is ideal for cutting soft, hard, dry wood prisms or wood with a length corresponding to the machine design.
Leman LOBRE045 plant shredder ideal for shredding fibrous or woody organic materials: leaves, wood and branches.
This Zipper ZI-HAEK4000 thermal plant shredder reliably shreds all the raw materials you can find in the garden such as shrubs, all kinds of branches or other plants up to 50 mm in diameter.
Metabo AHS 18-45 V cordless hedge trimmer with blades with special geometry for low wear and therefore 200% longer service life.
This Woodster CSP10 pruner (same machine as the Scheppach CSP2540) equipped with a lightweight, very efficient 25.3 cm3 2-stroke engine has powerful torque!
118-piece tool set for woodworking and DIY. Balanced and handy complete assortment of high-quality tools with sturdy carrying case.
Brushless cordless impact drill with optimal power for demanding applications! Supplied with 2 4AH LI-ION batteries and ASC 55 charger!
Brushless cordless drill driver with optimal power for demanding applications! Supplied with 2 4AH LI-ION batteries and ASC 55 charger!
Scheppach SG7100 generator set equipped with a 420 cm3 4-stroke engine providing 5500 W at maximum power.
The tool trolley Scheppach TW1000 comes equipped with A 263 tools !
This small Zipper ZI-FS115 electric tile cutter is a practical and ergonomic machine that can be transported easily!
MIG/MAG welding machine Holzmann MSA250 of compact structure, high performance, suitable for the welding by points, continuously and in space.
The Triton orbital sander has everything a professional needs: powerful motor, metal gears, the quality will win you over!
Metabo PE15-20RT angle polisher with high torque for fine sanding and high-gloss polishing of lacquered surfaces.
Jigsaw Metabo STE 100 equipped with the Quick system to change the blade without tools!
Extremely handy Metabo STE 140 jigsaw thanks to the small diameter of the handle and the rubberized softgrip surface!
Metabo BAE75 belt sander with powerful motor and Vario-Tacho-Constamatic system!
Robust Metabo KS66FS portable circular saw, usable directly on guide rails from Metabo and other manufacturers for long and precise cuts
Robust Metabo KS66FS portable circular saw, usable directly on guide rails from Metabo and other manufacturers for long and precise cuts
Robust portable circular saw Metabo KS 85 FS, usable directly on guide rails from Metabo and other manufacturers for long and precise cuts
This Scheppach brand power set includes a drill driver, an orbital sander, a multi-tool, a portable circular saw and a jigsaw! It comes with the charger and the 4ah battery!
Scheppach CCS165-20ProS portable circular saw delivered without battery or charger. Thanks to its large 165 mm blade you can saw elements with a thickness of 55 mm without problem and perform bevel cuts up to 35 mm high.
The Holzmann TAS165AKKU cordless plunge saw with 2 x 4Ah batteries allows you to work cordlessly at full power. Suitable for different materials such as solid wood, veneered wood, etc...
Here you are, ready to tackle all household and shop jobs with this battery-powered drill.
Supplied without battery and without battery charger
Work wirelessly and in complete freedom with the CJS254-20ProS battery-powered jigsaw! You will be able to work with great precision without needing a power supply thanks to this powerful motor powered by a 20V battery.
This compact portable sander is a must have tool for any DIY enthusiast. Thanks to its 125 mm disc, sanding jobs of small and large surfaces are carried out with great ease!
Supplied without battery and without battery charger
The Scheppach CMT200-20ProS battery-powered multifunction tool equipped with a battery will open up new horizons for you!
Supplied without battery and without battery charger
Box of 8 Metabo bimetal hole saws.
Set of 7 Metabo SDS-PLUS P4P drills allowing vibration-free drilling thanks to the Vario spiral with 4 helices!
Box of 56 Metabo bits in Chrome Vanadium steel (S2 quality).
The Holzmann NTS20S wet sharpener is perfect for grinding your carving and turning tools, as well as knives, scissors and more. The corundum wheel passes through a water tank to prevent the part from overheating. The speed is easily and continuously adjustable between 90 and 150 rpm.
Automatic power feeder Maggi Steff 2033 for spindle moulder - 750W, semi-professional, with 8 fixed speeds
Raised panel cutter heads diameter 150 mm to make raised panels on furniture- and kitchen furniture doors.
Raised panel cutter head diameter 150 mm to make raised panels on furniture- and kitchen furniture doors.
Easy-to-use Holzmann TS250 table saw, ideal for beginners in woodworking.
Planer thicknesser Holzmann HOB305PROSMW2 with helical shaft guaranteeing optimal results!
Thanks to theoptimal quality-price ratio, This metal Holzmann lathe is perfect for the modelers and the DIY.
The Promac TFGB-150-M belt grinder and grinder features a ball bearing mounted motor, a 50x250 mm belt sanding surface and a 150 mm 36 grit grinding wheel.
The Bernardo HBS 400 N band saw is the ideal machine for ambitious DIY enthusiasts.
This mini wood lathe brand Jean l'ébéniste MC0430VD has a 550W motor and is equipped with a 3-speed electronic speed controller.
This Holzmann D460F mini wood lathe has a 400W motor and is equipped with a 3-stage electronic speed controller.
Tool trolley Holzmann WEWA2130 with large storage space and total load of 950 kg.
The woodworking lathe Jean l'ébéniste MC1100B has a ground cast iron frame ensuring good rigidity and stability while absorbing vibrations.
This Scheppach brand power set includes an orbital sander, a multi-tool, a portable circular saw and a jigsaw! It comes with the charger and the 4ah battery!
