12mm Shank Carbide Insert Turning Tools for Metal Lathe (9 pieces)
Set of 9 turning tools with 12 mm tail carbide inserts for metal lathe
The HOLZMANN brand was born in 1995 and is now established and known throughout the world. The product range is constantly optimized and expanded, so that there is now a product portfolio of more than 1,500 products. The range consists of woodworking and metal machines, workshop equipment and even welding equipment.
Here you will find machines for :
You also find workshop and handling equipment such as hoists, wooden or metal workbenches, work tables and others.
Set of 9 turning tools with 12 mm tail carbide inserts for metal lathe
This table diameter 150 mm bore 29.53 mm is dedicated to mini wood lathes of different brands
Set of 9 turning tools with 16 mm tail carbide inserts for metal lathe
Reduction ring for holding 22 mm bore circular saw blades on Holzmann MTY8-70 and Bernardo SBS700 blade sharpeners
Steel impeller with a diameter of 230 mm, a height of 85 mm and a diameter of 16 mm with a special wedge seat for various chip vacuum cleaners
230V Motor for metal band saw Holzmann BS128HDR with axis 16.09 mm or manufactured after 2015
Single-phase Motor for drum sander Holzmann ZS400U, ZS560U and others
Motor 230V for Holzmann TS250 table saw
Motor for Holzmann TK255 circular saw
230V switch for Holzmann HBS400 band saw
230V switch for Holzmann HBS470PROFI band saw
Wire start capacitor for parquet sander PSM3
4-prong drive centre 40mm for wood lathe MK2
Holzmann FS300 4-speed spindle moulder equipped with a tilting shaft by handwheel, a powerful motor and cast iron tables.
400V motor for Holzmann ABS3880 chip vacuum cleaner
4Ah battery for Holzmann TAS165AKKU plunge saw - Pack of 2
The Holzmann VSTR3000 6-cylinder hydraulic manual clamping machine is ideal for gluing and clamping frames and panels in workshops.
608 mm Chain for Holzmann and Bernardo Jointed Planer and Combination Wood according to the list below
704 mm Chain for Holzmann and Bernardo Jointed Planer and Combination Wood as listed below
Abrasive belt 200 x 650 mm - grain 40 designed for Holzmann PSM3 parquet sander
Abrasive belt 2740x150 mm in grain 120 for oscillating belt sander
Abrasive belt 2740x150 mm in grain 80 for oscillating belt sander
Abrasive belt 2740x150 mm in grain 120 for oscillating belt sander
Abrasive belt 40x620 mm for metal sander - Grain 100
Abrasive belt 40x620 mm for metal sander - Grain 120
Strip abrasive 40 x 620 grain 180 for belt sander portable metal Holzmann RSG620
Strip abrasive 40 x 620 grain 240 for portable metal Holzmann RSG620.
Strip abrasive 40 x 620 grain 400 for belt sander portable metal Holzmann RSG620
Abrasive belt 40x620 mm for metal sander - Grit 80
Abrasive belt 650 x 200 mm - grain 120 designed for Holzmann PSM3 parquet sander
Abrasive belt 650 x 200 mm - grain 150 designed for Holzmann PSM3 parquet sander
Abrasive belt 650 x 200 mm - grain 60 designed for Holzmann PSM3 parquet sander
Abrasive belt 650 x 200 mm - grain 80 designed for Holzmann PSM3 parquet sander
Abrasive belt grit 100 in a professional quality for drum sander width 560 mm
Abrasive belt grit 120 in a professional quality for drum sander width 560 mm
Abrasive belt grit 240 in a professional quality for drum sander width 560 mm
Abrasive belt grit 80 in a professional quality for drum sander width 560 mm
Abrasive disc paper support diameter 200 mm for sander polishers, orbital sander
Abrasive for expansion sanding roller - Grain 240
Abrasive for expansion sanding roller - Grain 400
Abrasive for expansion sanding roller - Grain 60
Abrasive for expansion sanding roller - Grain 80
Abrasive for expansion sanding roller - grit 120
This roll flap is ideal for sanding of surfaces and sanding curved pieces and not planes!
This roll flap is ideal for sanding of surfaces and sanding curved pieces and not planes!
This roll flap is ideal for sanding of surfaces and sanding curved pieces and not planes!
The universal bending machine Holzmann UB70 is used for bending the metal hot and cold!
Holzmann STST16 angle iron former with manual control. Ideal in workshops and for the restoration of old vehicles.
This Holzmann STST25 angle iron former is a small, versatile and ergonomic machine ideal for the workshop!
Holzmann STST25D angle former for compressing and stretching metal parts.
Angle guide for circular saw Holzmann TS250
Armature for table miter saw Holzmann TK305
Start your single-phase or three-phase wood machine at the same time as your vacuum cleaner with this automatic release!
Holzmann WSR40PRO automatic water hose reel equipped with a 40 m hose!
Bags for Holzmann MABS1500 metal chip vacuum cleaners
Multidirectional trolley for moving the length and width of long pieces, supports up to 60 kg!
Holzmann HBS300J band saw with aluminum flywheels, swivel gray cast iron table and powerful motor.
The Holzmann HBS600 DELUX band saw is a precision machine with a powerful 4000 W motor.
The Holzmann HBS800 band saw is a machine equipped with a cast iron table, a powerful motor and rubber-coated flywheels to ensure a long life of the belt.
Small compact and lightweight Holzmann HBS230ECO band saw ideal for small jobs.
The Holzmann HBS400 band saw offers a cutting height of 220 mm, cast iron rims of 400 mm, 1500W motor ...
The Holzmann HBS400 band saw offers a cutting height of 220 mm, cast iron rims of 400 mm, 1500W motor ...
The Holzmann HBS470Profi band saw offers a high cutting height of 285 mm, 470 mm cast iron wheels, 1500 W motor available in single or three phase.
The Holzmann HBS470Profi band saw offers a high cutting height of 285 mm, 470 mm cast iron wheels, 1500 W motor available in single or three phase.
The band saw Holzmann HBS610 offers a good cutting height of 310 mm, 610 mm cast iron wheels, 4 HP motor available in mono or three-phase.
The band saw Holzmann HBS610 offers a good cutting height of 310 mm, 610 mm cast iron wheels, 4 HP motor available in mono or three-phase.
The Holzmann HBS700 band saw is a professional model with 5.5 hp motorization, large 700 mm diameter cast-iron flywheels and a very high cutting capacity of 430 mm!
320x206x990 mm base specially designed to support a grinder
Base for the manual folding machine Holzmann AKM1220.
Bearing mark 122 for planer jointer Bernardo PT260, Holzmann HOB260ABS
Belt 690 mm for Holzmann D460FXL wood lathe
Robust and powerful Holzmann DSM100200B belt and disc grinder ideal for sanding your parts!
This Holzmann BT1220TOP long belt and disc sander is a machine with a large flat surface for sanding and dressing work. The rounded end of the band is ideal for modeling and sanding fretwork shapes.
The HOLZMANN BT203-914_230V belt and disc sander is a versatile helper for frequent wood sanding jobs. A solid cast iron body and ball bearing drive shaft provide vibration-free grinding. This model impresses with its powerful 550 watt motor and particularly large tables.
Holzmann R455B belt and roller sander with side opening for sanding large workpieces up to 914 mm.
Belt for belt and disc sander
Belt for drill press Holzmann SB3116RMN and Jean l'ébéniste PCR3116E