Carbamex whitewash highlights the grain of wood in white furniture and small surfaces.

Whitewash Carbamex® brings an inimitable cachet to veined woods such as oak, chestnut, ash.

Its delicate alternation between white and the color of the wood makes it easy to create a beautiful decorative look.

Preparation of the piece of wood to be patinated:

• Intended for clean, dry surfaces without traces of old finishes.
• If necessary, bare the wood with Briançon Stripper or Wax Remover then sand.
• Contaminated wood must be scraped, cleaned, then treated with Aqua Briançon Wood Treatment
• Dig the wood with a wire brush in the direction of the grain, more or less deeply depending on the desired effect
• Dust carefully

How to use whitened aged effects whitewash:

• The Céruse Carbamex is ready to use.
• Shake well before use.
• Apply with a brush or a cloth, wiping off the excess as you go with a cloth.
• Grate very lightly so that only the hollow veins remain white and dust well.
• >Cover with a Wax, an Oil or a Briançon or Blanchon Varnish
• Utensil cleaning: Acetone
• Immediately after use.
• Thoroughly wring the material after application. Wipe it well. Rinse it with very little water in a container.
• Let this water evaporate. The residue can then be discarded normally in the trash.
• Do not dispose of residues in the sewer.

Technical characteristics of Carbamex white lead:

• Yield: 16 m² per liter per coat, approximately
• Drying: about 2 hours
• Shelf life: 1 year in original sealed packaging. Store away from frost
• Recap carefully after use.
• De Blanchon or formerly Briançon