The band saw is a table saw that allows the cutting of wood and its derivatives, the edging of wooden boards and fretwork.
The amateur is entitled to think that the acquisition of a wood combination will be enough to carry out all the carpentry work but he is wrong... The circular saw will show him shortcomings both by its reduced cutting height and the inability to make circular cuts. The thicknesser-planer will only be able to accept wood matching its own width. The band saw is an essential woodworking machine because it offers the possibility of fretwork and a large cutting height capacity! Our range is very wide, the choice very easy: for DIY or professional, everyone will find their band saw adapted to their work and their workshop!
Whether it is light or heavy, working with a band saw must always be stable! Do not hesitate to fix it to a workbench for small models using clamps or other so that it cannot move during cutting. Same advice for wood, avoid overhang, provide sideboards to support it at the back of the machine so that it does not tip over. There is no shortage of safety features on a bandsaw, such as the door switch that will prevent the machine from starting if the door is not properly closed, the upper and lower blade guides that will protect you from the blade, the saw table used to support the pieces of wood must be well sized especially for sawing firewood, essential safety features that must not be modified in any way! The power and speed of the electric motor must be adapted according to the type of cut and the width of the blade.
For each model, we offer band blades for fretwork or cutting, different blade widths that will allow the user to easily make curves or straight cuts.
Zipper ZI-BAS205 bandsaw, very complete, perfect for small crafts, DIY or learning marquetry and modeling.
Zipper ZI-BAS250 bandsaw, very complete, perfect for small crafts, DIY or learning marquetry and modeling.
Small compact and lightweight Holzmann HBS230ECO band saw ideal for small jobs.
This small JET JWBS-9X bandsaw will offer amateurs the possibility of cutting panels with dimensions less than or equal to 230mm, over a maximum height of 80mm.
JET JWBS 10-M band saw with a capacity of 100 mm and equipped with a large table allowing you to work on already substantial sections.
Robust Holzmann HBS245HQ band saw with 254mm cast aluminum flywheels, 2-speed motor and polished and ground gray cast iron table.
The HBS 260 bandsaw offers generous cutting power in a minimum of space. Its optimal price-performance ratio makes it the ideal tool for DIY enthusiasts.
The HBS 320 bandsaw offers generous cutting power in a minimum of space. Its optimal price-performance ratio makes it the ideal tool for DIY enthusiasts.
Holzmann HBS300J band saw with aluminum flywheels, swivel gray cast iron table and powerful motor.
The JET JBS12-M band saw is only available single-phase. Its 305 mm wheel and its blade width of 5 to 16 mm allow fretwork at a cutting height of 180 mm. Its cast iron table tilts 45 degrees and its cutting depth is 305 mm.
The HBS 360 bandsaw offers generous cutting power in a minimum of space. Its optimal price-performance ratio makes it the ideal tool for DIY enthusiasts.
The Leman SRU355 band saw offers good cutting capabilities thanks to its 200 mm cutting height and 345 mm gooseneck width!
The band saw Jean l'ébéniste BS350 has 2 speeds for cutting wood and other materials by adapting the blade, powerful engine 1 HP!
The new Holzprofi HBS350 Band Saw is a solid construction with good cutting capabilities that puts it in the professional range!
The Holzmann HBS400 band saw offers a cutting height of 220 mm, cast iron rims of 400 mm, 1500W motor ...
Bandsaw Bernardo HBS400 offers a beautiful cutting height of 220 mm, 400 mm in cast iron, 1500W motor flying...
Bandsaw Bernardo HBS400 offers a beautiful cutting height of 220 mm, 400 mm in cast iron, 1500W motor flying...
The Holzmann HBS400 band saw offers a cutting height of 220 mm, cast iron rims of 400 mm, 1500W motor ...
The Leman SRU356 band saw comes with a wheeled base for easy movement and good cutting performance thanks to its 235 mm cutting height and 345 mm gooseneck width!
Holzmann HBS450 band saw - 400V
The Holzmann HBS470Profi band saw offers a high cutting height of 285 mm, 470 mm cast iron wheels, 1500 W motor available in single or three phase.
The Holzmann HBS470Profi band saw offers a high cutting height of 285 mm, 470 mm cast iron wheels, 1500 W motor available in single or three phase.
The Bernardo HBS 400 N band saw is the ideal machine for ambitious DIY enthusiasts.
The Bernardo HBS 400 N band saw is the ideal machine for ambitious DIY enthusiasts.
The Leman SRU470 band saw offers high cutting capacity thanks to its 275 mm cutting height and 465 mm gooseneck width!
The Leman SRU470 band saw offers high cutting capacity thanks to its 275 mm cutting height and 465 mm gooseneck width!
The Bernardo HBS460N band saw is the ideal machine for ambitious DIY enthusiasts. This model is fitted with a 2-speed gearbox as standard. The machine also has a quick-release lever to change the tape quickly.
The Bernardo HBS460N band saw is the ideal machine for ambitious DIY enthusiasts. This model is fitted with a 2-speed gearbox as standard. The machine also has a quick-release lever to change the tape quickly.
The band saw Jean l'ébéniste BS480 offers great cutting capabilities with a powerful 3 HP engine!
The band saw Jean l'ébéniste BS480 offers great cutting capabilities with a powerful 3 HP engine!
Holzprofi Maker HBS430M bandsaw designed to best meet the needs of woodworking enthusiasts. It combines impeccable quality and price with professional machine options.
The HBS480 Holzprofi Band Saw is a robust, accurate machine with really interesting capabilities for the discerning and professional looking for large widths and cutting heights!
The HBS480 Holzprofi Band Saw is a robust, accurate machine with really interesting capabilities for the discerning and professional looking for large widths and cutting heights!
The JET JWBS-15-M bandsaw has a 375mm flywheel and a blade width of 5-25mm allowing for fretwork over a cutting height of 356mm. Its cast iron table tilts 45 degrees and its cutting depth is 359 mm.
The JET JWBS-15-M bandsaw has a 375mm flywheel and a blade width of 5-25mm allowing for fretwork over a cutting height of 356mm. Its cast iron table tilts 45 degrees and its cutting depth is 359 mm.
The band saw Holzprofi HBS530 is a robust, accurate machine with really interesting capabilities!
The band saw Holzprofi HBS530 is a robust, accurate machine with really interesting capabilities!
The Bernardo HBS510 band saw offers a good cutting height of 305 mm, cast iron rims of 500 mm, 3 HP motor!
The band saw Holzmann HBS610 offers a good cutting height of 310 mm, 610 mm cast iron wheels, 4 HP motor available in mono or three-phase.
The band saw Holzmann HBS610 offers a good cutting height of 310 mm, 610 mm cast iron wheels, 4 HP motor available in mono or three-phase.
JET JWBS-20 400V band saw allowing a cutting height of 300 mm.
The Bernardo HBS450 bandsaw seduces with its large ground table and gray cast iron steering wheels. For the budget-conscious DIYer, this is the ideal machine.
The Bernardo HBS450 bandsaw seduces with its large ground table and gray cast iron steering wheels. For the budget-conscious DIYer, this is the ideal machine.
The JWBS-18 bandsaw has a 460mm flywheel and the 32mm blade width allows for edging over a cutting height of 406mm, the cast iron table tilts 45 degrees and the depth of cut is 457 mm.
The JWBS-18 bandsaw has a 460mm flywheel and the 32mm blade width allows for edging over a cutting height of 406mm, the cast iron table tilts 45 degrees and the depth of cut is 457 mm.
Robust and powerful Bernardo HBS600E band saw equipped with a 4.8 kW motor, two suction outlets Ø 100 mm. Cutting width of 600 mm.
The Holzmann HBS600 DELUX band saw is a precision machine with a powerful 4000 W motor.
The Bernardo HBS600N band saw is equipped as standard with a brake motor, a high-precision band saw guide with 3 rollers and gray cast iron drive wheels. In addition, on this series of machines, a quick release lever allows easy replacement of the band saw.
Diameter of the steering wheel 630 mm. Massive building construction. Large tilting cast iron table. Balanced wheels in cast iron. Very large cutting capacities. Upper and lower blade guide with three rollers. High-end manufacturing.
Robust and powerful Bernardo HBS700E band saw equipped with a 5.5 kW motor, two suction outputs of Ø 100 mm. Cutting width 700 mm.
The Holzmann HBS700 band saw is a professional model with 5.5 hp motorization, large 700 mm diameter cast-iron flywheels and a very high cutting capacity of 430 mm!
The Bernardo HBS700N band saw is a professional model with 5.5 hp motorization, large 700 mm diameter cast-iron flywheels and a very high cutting capacity of 430 mm!
Bernardo HBS800E band saw with two Ø100 mm suction outlets and 800 mm cutting width!
The Holzmann HBS800 band saw is a machine equipped with a cast iron table, a powerful motor and rubber-coated flywheels to ensure a long life of the belt.
