Advantages of the JET JPT-310 planer thicknesser :

• Quick change from jointer to planer by switching input and output tables simultaneously
• Machined jointer table, in gray cast iron guaranteeing optimal sliding of the workpieces
• Disengageable wood feed in jointer position
• Safety on the protection of the shaft in the planer position
• Resharpenable blades 310 x 25 x3.0 mm

The JET JPT-310 planer thicknesser comes with:

• Set of 3 mounted blades
• 100mm suction nozzle
• Jointer Table Precision Guide
• Tiltable shaft protection
• push button

Technical characteristics of the planer thicknesser JET JPT-310:

• Motor power P1 - 230V: 2200W / S1 100%
• Max planing width : 307mm
• Maximum planing height: min 3 - max 225 mm
• Max. pass thickness (Planing) 4.5 mm
• Max thickness of pass (Thicknesser): 3 mm
• Advance speed: 7 m/min - disengageable
• Segmented input roller diameter: yes
• Steel output roller diameter: yes
• Rubber output roller diameter: 32 mm
• Length of the jointer table: 1400 x 310 mm
• Minimum work piece length: 150 mm
• Rotation speed - planer: 5,500 rpm.
• Shaft diameter: 70mm
• Number of irons: 3
• Planing guide (H x W): 150 x 1100 mm
• Guide tilt: +45° / 90°
• Suction connection diameter: 100 mm
• Dimensions: 1400 x 750 x 1000mm
• Net weight (kg): 270.00 kg

Important Probois recommendation for many woodworking machines:

Before starting, always check the inside of your machine, check that the belts are correctly positioned, tighten the bolts, etc., as various transport operations cause vibrations.

Always use a 2.5² wire extension cord.

The extension cord must not exceed 10 meters and must not be coiled.

The use of bench grinders, triplet plugs, or power strips is PROHIBITED.

Have a standard electrical meter with neutral and ground connections.

Always work with a chip vacuum for your health and to protect the machine's warranty.

Always grease cast iron tables with wood slides.

Always work with the guards in place.

Do not work with dull or blunt blades; this can damage the mechanism, the planer's feed, or break the belt.