Important Probois recommendation for many woodworking machines :

• Before starting, always check the inside of your machine, see if the belts are fitted correctly, tighten the bolts, grease the tables, etc... because the various transports cause vibrations.
• Always use a 2.5² wire size extension cord
• The extension cord must not exceed 10 meters and must not be rolled up
• The use of drums, triplets or multi-plugs is PROHIBITED
• Provide an electric meter with special machine start fuses of at least 16A
• Have a standard electricity meter with neutral and earth
• Always work with a chip extractor for your health and for the guarantee of the machine
• Always grease cast iron tables with wood glider
• Always work with guards in place
• Do not work with blunt or dull blades this can damage the mechanism, the feed of the planer, break the belt
• The machine does not start? Undoubtedly the shavings ejection casing is badly set up on the planer jointer side, it is a security!

General description of the Holzmann HOB310ECO planer thicknesser :

• Arbor with 3 blades, diameter 70 mm.
• Woodworking machine with centralized adjustment of the thicknessing table height by mechanical indicator.
• Planer tables raise together to switch to planing mode.
• Large width passage capacities: 310 mm in planing mode; 308 mm in planing mode.
• Large cast iron planing tables with a length of 1285mm, to allow you to pass wooden cleats easily.
• Massive and powerful machine of 180 Kg.
• Extra-long jointer fence runs nearly the full length of tables.

The Holzmann HOB310ECO planer jointer comes with:

• Perpendicular guide 1100 x 150 mm
• 3 x irons pre-mounted on the shaft

Technical characteristics of the planer thicknesser Holzmann HOB310ECO:

• Motor power S1: 2200 W
• Voltage: 230V
• Planer table size: 1285 mm x 310 mm
• Dimensions of the perpendicular guide: 1100 mm x 150 mm
• Inclination of the perpendicular guide: -45° to 90°
• Maximum planing thickness: 3 mm
• Height of the planing table: 852 mm
• Planer table size: 545mm x 308mm
• Planing depth: 4 mm
• Shaft diameter: 70mm
• Shaft speed: 5500 rpm
• Number of irons: 3
• Maximum planing height: 225 mm
• Minimum thickness of the part to pass: 6 mm
• Suction nozzle diameter: 100 mm
• Machine dimensions (L x W x H): 1285 x 750 x 1000 mm
• Speed of the wood feed rollers: 7 meters / minute
• Sound pressure level LpA: 89.5 dB(A)
• Sound power level LWA: 103 dB(A)
• Net / Gross Weight: 179.50 Kg / 206 Kg
• Packaging dimensions (L x W x H): 1320 x 565 x 960 mm