• Spindle moulder Jean l'ébéniste MX5110 - 230V
  • Spindle moulder Jean l'ébéniste MX5110 - 230V
  • Spindle moulder Jean l'ébéniste MX5110 - 230V
  • Spindle moulder Jean l'ébéniste MX5110 - 230V
  • Spindle moulder Jean l'ébéniste MX5110 - 230V

Spindle moulder Jean l'ébéniste MX5110 - 230V

2,385.00 € Tax included

Including €2.80 for ecotax

Reference: HJMX5110-230V

The spindle moulder fixed MX5110 by Jean l'ébéniste offers large machining capabilities with electrical reversal of the direction of rotation of the shaft.

Quantity
Factory Shipping, delivery time 5-8 working days

  • Totally secure payment! Totally secure payment!
  • Be delivered where you want! Be delivered where you want!
  • 14 days to change your mind! 14 days to change your mind!

This 4-speed Jean l'ébéniste MX5110 spindle moulder is equipped with a robust cast iron!

It is equipped with a sliding tenoning carriage, a telescopic ruler with stop and eccentric presser. Indication of speeds by LED.

The advantages of this Jean l'ébéniste MX5110 4-speed spindle moulder :

  • Sturdy machine-welded steel frame.
  • Powerful 2800 W (3.7CV) asynchronous motor.
  • 4 rotation speeds including 1 slow (1800 rpm) for sanding. Indication of the speed by an indicator light, change of speed by modifying the position of the belt on the pulleys.
  • Routing table in cast iron with an opening for tools up to 180 mm in diameter.
  • Cast iron router hood with Ø 100 mm suction outlet, horizontal presser and vertical roller presser.
  • The maximum diameter of the tool in the hood is 200 mm.
  • Shaft diameter 30 mm and height 100 mm, adjustable by crank on 100 mm in height.
  • Tenoning carriage on a 1200 mm slide with a clearance of 810 mm, sliding thanks to bearings with backlash.
  • Aluminum turning table with vertical presser with eccentric clamping, angle guide, large scale (extendable up to 1500 mm), length stop with micrometric adjustment. The turning table can be dismantled in a jiffy, without tools.
  • Engine access door fitted with a safety switch.
  • Great machining capacities.
  • Electric reversal of the direction of rotation of the shaft.
  • Equipped with a sliding tenoning carriage, a telescopic rule (1500 mm) with stop and eccentric presser.
  • Indication of speeds by LED.

Machine delivered with: 1 sanding roller, 1 bar guide and 1 tenoning board.

Technical characteristics of this Jean l'ébéniste MX5110 4-speed spindle moulder :

  • Motor power 230 V: 2800 W - 3.7CV
  • Dimensions: 1220 x 1435 x 1350 mm
  • Motor rotation speed: 2800 rpm
  • Shaft rotation speed: 1800-3000 / 6000-9000 rpm
  • Shaft diameter: 30mm
  • Shaft height: 100mm
  • Shaft stroke: 100mm
  • Shaft end screw: M10
  • Maximum Ø of the tool in the table: 180 mm
  • Well depth: 100 mm
  • Ø max of the tool in the hood: 210 mm
  • Suction outlet: Ø 100 mm
  • Dimensions of the table: 710 x 640 mm
  • Working height: 910 mm
  • Turning table (W x D): 500 x 490 mm
  • Rail length: 1250mm
  • Carriage stroke: 850 mm
  • Angle guide: from -45° to +45°
  • Tenoning rule: up to 1500 mm
  • Weight: 200kg

Important Probois recommendation for many woodworking machines:

Before starting, always check the inside of your machine, see if the belts are fitted correctly, tighten the bolts, etc... because the various transports cause vibrations.

Always use a 2.5² wire size extension cord

The extension cord must not exceed 10 meters and must not be rolled up

The use of drums, triplets or multi-plugs is PROHIBITED

Have a standard electricity meter with neutral and earth

Always work with a chip extractor for your health and for the guarantee of the machine

Always work with guards in place

Do not work with blunt or blunt tools as this may damage the internal mechanism.

HJMX5110-230V
4 Items

Data sheet

Delivery
Additional flat rate delivery

You might also like