Bernardo TK200RSN Table circular saw with frame allowing the upper part to be placed precisely on it and allowing the installation of an optional movement kit.

It has the same characteristics as the Kity 419 or the Scheppach Precisa 2.0 which are unfortunately no longer manufactured.

The advantages of the TK200RSN Table circular saw :

• Cutting height from 0 to 55 mm, speed 4750 rpm.
• The belt transmission eliminates any vibration of the blade and ensures a constant speed.
• Machine equipped with a thermal probe motor which protects against any risk of overheating.
• Well-designed accessories which increase the sawing capacities of this machine and make it a product with vast possibilities in the workshop and on the construction site.
• Blade tilt from 0° to 45°.
• The saw carriage is equipped with an adjustable guide and a retractable length stop. It is mounted on a movable rail that increases the cutting capacity before and after the blade.
• The 1 m rail slides and locks in any position in front or behind the blade to allow a cutting capacity of panels before the blade of 600 mm.

Important recommendation from Probois for many woodworking machines:

• Before starting up, always check the inside of your machine, see if the belts are correctly placed, tighten the bolts, etc. because the various transports cause vibrations.
• Always use an extension cord with a wire thickness of 2.5²
• The extension cord must not exceed 10 meters and must not be coiled
• The use of a reel, triplets or multi-socket is PROHIBITED
• Have a standard electric meter with neutral and earth
• Always work with a chip vacuum cleaner for your health and for the machine warranty
• Always work with the protections in place
• Do not work with dull or blunt tools, this can damage the internal mechanism.
• Technical characteristics of the Bernardo TK200RSN table circular saw :
• Table dimensions mm: 530 x 400
• Cut at the parallel guide mm: 695
• Extensions: 2x 300 mm x 530 mm
• Blade tilt: from 90 to 45°
• Cutting height at 45/90 mm: 40/55
• Saw blade diameter/bore mm: 200/30
• Rotation speed rpm: 4750
• Suction diameter: 50 mm
• 230V motor - Absorbed power S1 100%: 1100 W
• 230V motor - Useful power S6 40%: 1500 W
• Thermal protection: yes
• Machine dimensions: 1580 x 1010 x 940 mm
• Weight kg: 84

Sawing carriage :

• Table dimensions mm: 400 x 1000
• Stroke mm: 710

Table extension:

• Table dimensions with extension mm: 530 x 2x300
• Cutting width at the parallel guide mm: 760 mm

Optional: Very essential! The reducer for connecting the chip vacuum cleaner!