This Holzmann TS250FL Sliding table saw has a frame and a mechanically welded motor housing cover!

This machine with multiple options will allow you to make precise cuts with ease!

The advantages of this Sliding table saw :

• Saw table in cast steel with right extension and mechanically welded output.
• 3 HP asynchronous motor, durable and silent.
• Saw carriage flush with the blade in aluminum with sliding on steel balls.
• Aluminum rip fence with micrometric adjustment, and knurled clamping handle.
• Rip stop for cutting wood or panels.
• Large carriage table with graduated ruler and stop extendable to 2280 mm.
• Cleaning hatch on the motor housing cover, allowing the evacuation of sawdust and annoying wood scraps.
• Blade adjustable in height and tiltable up to 45°, on the right.
• Adjustment by 2 independent cranks.
• Support stand for better stability of the machine when machining large dimensions on the cutting carriage.
• Suction outlet on the blade cover Ø 30 mm, connected to the collector by a hose (supplied).

The machine is delivered with :

the rip fence, the side carriage, the ripping stop, a 36-tooth carbide blade, the table extensions, the pusher, keys and instructions for use.

Technical characteristics of the Holzmann TS250FL table circular saw :

• Motor power (230V or 400V -50Hz): 2100W - 3CV
• Dimensions: 2260 x 2070 x 1160 mm
• Blade rotation speed: 4060 rpm
• Blade diameter: 255 mm
• Blade bore: 30 mm
• Blade tilt: from 0 to 45° to the right
• Maximum cutting height: 80 mm
• Cutting height at 45°: 50 mm
• Dimensions of the saw table + extensions (L x W): 1210 x 620 mm
• Dimensions of the carriage (L x W): 1320 x 238 mm
• Dimensions of the carriage table (L x W): 600 x 400 mm
• Ribbing stroke with stop: 1050 mm
• Maximum ripping width: 600 mm
• Suction outlet: 100 mm
• Weight: 152 kg
• Packaging (L x W x H):
• Machine: 860 x 625 x 570 mm
• Carriage: 1380 x 380 x 130 mm
• Carriage table: 890 x 515 x 150 mm
• Table extension: 805 x 305 x 55 mm
• Gross weight: 165 kg

Important recommendation from Probois for many woodworking machines :

• Before starting up, always check the inside of your machine, see if the belts are correctly positioned, tighten the bolts, etc. because the various transports cause vibrations.
• Always use an extension cord with a wire thickness of 2.5²
• The extension cord must not exceed 10 meters and must not be coiled
• The use of a reel, triplets or multi-socket is PROHIBITED
• Have a standard electric meter with neutral and earth
• Always work with a chip vacuum cleaner for your health and for the machine warranty
• Always grease the cast iron tables with wood slide
• Always work with the guards in place
• Do not work with dull or blunt irons, this can damage the mechanism, the advance of the planer, break the belt