This Sliding table saw Jean l'ébéniste SAF1300 is ideal for small workshops!

This machine with multiple options will allow you to make precise cuts with ease!

The advantages of this Sliding table saw Jean l'ébéniste SAF1300 :

• Cast steel sawing table with right extension and mechanically welded outlet.
• 3 CV asynchronous motor, durable and silent.
• Sawing carriage flush with the aluminum blade with sliding on steel balls.
• Alu slitting guide with micrometric adjustment, and knurled tightening handle.
• Edging stop for cutting timber or panels.
• Large trolley table with graduated rule and extendable stop.
• Cleaning hatch on the crankcase casing, allowing the removal of bothersome sawdust and offcuts.
• Blade height adjustable and tiltable up to 45 °, right.
• Adjustment by 2 independent cranks.
• Support stand for the frame allowing better machine stability when machining large dimensions on the cutting carriage.
• Suction outlet on the blade cover connected to the manifold by a flexible (supplied).

The machine is delivered with:

the rip fence, the side carriage, the edging stop, a carbide blade, the table extensions, the pusher, keys and user manual.

Technical characteristics of the Sliding table saw Jean l'ébéniste SAF1300 :

• Motor power (230V-50Hz): 2200W - 3CV
• Dimensions: 1300 x 2160 x 1130 mm
• Blade rotation speed: 4060 RPM
• Blade diameter: 254 mm
• Blade bore: 30 mm
• Blade tilt: 0 to 45 ° right
• Maximum cutting height: 80 mm
• Cutting height at 45 °: 50 mm
• Dimensions of the cast iron table: 670x310 mm
• Dimensions of the sheet metal side table: 670x400 mm
• Dimensions of the rear sheet metal extension: 325x310 mm
• Cutting length: 1300 mm
• Cutting width: 680 mm
• Trolley frame: 600x450 mm
• Suction outlet: 100 mm
• Weight: 255 Kg

Important recommendation from Probois for many woodworking machines:

• Before starting, always check the inside of your machine, see if the belts are correctly placed, tighten the bolts, etc. because the various transports cause vibrations.
• Always use an extension cord with a 2.5² wire thickness
• The extension cord must not exceed 10 meters and must not be coiled
• The use of a reel, triplets or multi-socket is PROHIBITED
• Have a standard electric meter with neutral and earth
• Always work with a chip vacuum cleaner for your health and for the machine warranty
• Always work with the protections in place
• Do not work with blunt or dull tools, this can damage the internal mechanism.