The Holzmann DHM330PROSMW2 helical planer is compact and easy to transport!

This makes this model ideal for use on construction sites as well.

The advantages of the Holzmann DHM330PROSMW2 planer :

• Noise reduction of approximately 50% thanks to the helical spindle with inserts
• Reversible carbide inserts last 4 times longer, 20 times longer than conventional blades
• Optimal surface quality thanks to carbide inserts
• The planing unit, guided by four wires, and the rubber-coated infeed roller guarantee the most precise results.
• A handwheel and scale allow precise adjustment of the planing height.
• Dust hood at the rear of the machine.
• Foldable table extension.
• Handles on the side allow for easy transport.

Technical specifications of the Holzmann DHM330PROSMW2 planer :

• S1 motor power: 1500 W
• Voltage: 230 V / 50 Hz
• Feed speed: 6 m/min
• Machine dimensions: 710 x 600 x 475 mm
• Workpiece length: 152 mm
• Min. workpiece thickness: 5 mm
• Max. workpiece thickness: 152 mm
• Table dimensions: 330 x 235 mm
• Max. depth of cut: 0.8 | 2.4 mm
• Planing height: 152 mm
• Arbor diameter: 50 x 330 mm
• Arbor rotation speed: 8500 rpm
• Sound power level: 96.8 dB
• Sound pressure level: 83.8 dB
• Gross weight: 37 kg
• Net weight: 34 kg

The Holzmann DHM330PROSMW2 planer comes with :

• Helical shaft (30 pieces 15 x 15 x 2.5 mm, 37°)

Important recommendation from Probois for many woodworking machines :

Before starting up, always check the inside of your machine, check that the belts are correctly positioned, tighten the bolts, etc., as various transport operations cause vibrations.

Always use a 2.5² wire gauge extension cord.

The extension cord must not exceed 10 meters and must not be coiled.

The use of bench grinders, triple sockets, or power strips is PROHIBITED.

Have a compliant electrical meter with neutral and ground connections.

Always work with a chip vacuum for your health and to protect the machine's warranty.

Always grease cast iron tables with wood slides.

Always work with guards in place.

Do not work with dull or blunt blades; this can damage the mechanism, the planer's feed, and break the belt.